Brief introduction:
servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; blue light radiant box can give the baby jaundice phototherapy treatment when keeping warm on baby with blue light timer.

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.

Technical specification:
Power supply : AC220V，50HZ
Power input: ≤600VA
Temperature control range：25℃~37℃
Changing of temperature: ≤0.5℃
Uniformity of temperature: ≤0.8℃
Temperature rising time: < 45 min
Noise level: ≤55dB（A）
Average radiation of blue light: ≥500μW/cm2
Timing range of blue light timer：0~9999 hour 59 minutes
Accumulative error of blue light timing：≤0.002%

Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the air temperature control ≤38℃；
Deviation alarm: air temperature control ±3℃；
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.

Package：
Gross Weight：83Kg
Measurement：1085mm×640mm×1110mm

Notice：
Some technical data of this model can be changed properly in standard permission range according to the standard and user’s requirement like infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.