Brief introduction:
This unit is made of plastic mould with clipper-built design; Air temperature or skin temperature of servo-controlled by micro-computer with oxygen concentration monitoring system and humidity control system and tray (optional); integrated sensor box including the skin temperature sensor, air temperature sensor, oxygen concentration sensor and humidity sensor; the air circulation system can keep the uniformity of bed temperature; double wall hood can be opened on the front and back side, x-ray cassette can be put under the bed; quite operation windows; inclination of infant bed can be adjusted in 0～5°; ,the water tank can be pulled out freely; LED digital display, set-temp, skin temp 1, 2, air temp, oxygen concentration, humidity, heating power, and alarm classification and so on; >37℃ temperature setting; 48hrs memory curve;8 self-checking alarms with audible and visible; RS 232 connector, data output. Electric lift stand, and drawers.

Standard configure:
Temperature controller, humidity system (optional), oxygen infusion (optional), infant bed, integrated sensor box, x-ray cassette frame, humidity water tank, I.V. Pole, tray, air filter, lift stand.
Technical specification:
Power supply : AC220V，50HZ
Power input: ≤1300VA
Air Temperature control range：25℃~37℃ can override to 39℃
Skin Temperature control range：34℃~37℃ can override to 38℃
Sensor precision: ≤0.3℃
Changing of temperature: ≤0.5℃
Uniformity of temperature: ≤0.8℃(bed is on the level position)
Temperature rising time: ≤40min（environmental temperature +22℃）
Noise level: ≤55dB（A）（environmental noise ≤40dB）
Inclination of bassinet: 0°~5°
Adjustment height of lift stand: < 200 mm
Indication range of oxygen concentration：0%～99%
setting range of oxygen concentration：20%～60%（1% each time）
Indication precision of oxygen concentration：±3%
Humidity indication range：0%RH～90%RH
Humidity control range：20%RH～90%RH（1% each time）
Humidity indication precision：±6%RH(environmental temperature 20℃～40℃，environmental humidity 10%RH～90%RH)
Indication presicion of humidity：±6%RH
Capacity of water tank：1000 ml
Working time of water tank when it is filled with water：≥12 hours ( less than 60%RH)

Alarming:
audible and visible alarm indication, and LED display can indicate the real temperature (except for power failure alarm and system alarm), For the following alarm 1-6(except for lower deviation), temperature controller can cut off the power supply of heater automatically.
Over-temp alarm: when the air temperature control ≤38℃(setting temperature is less than 37℃ ), or≤40℃(setting temperature is more than 37℃)；skin temperature control ≤40℃;
Deviation alarm: air temperature control ±3.0℃, skin temperature control ±1.0℃；
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or skin sensor 1 is not in the right position;
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working;
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.
oxygen concentration alarm：±5%O2；
humidity deviation alarm：±15%RH。

Package：
Gross Weight：Main body 70Kg / Cabinet 80Kg
Measurement：Main body 1100mm×707mm×873mm
Cabinet 1029mm×697mm×816mm


Notice：
Some technical data of this model can be changed properly in standard permission range according to the standard and user’s requirement like oxygen concentration monitoring system and humidity control system, lift stand, blue light radiant box, infant scale, tray. If the technical specification of above product changes, please refer to the standard at selling time.