Brief introduction:
servo-controlled by micro-computer with option of automatic control or manual control the temperature; skin temperature sensor and bed temperature sensor; touch switch panel, setting temperature, real temperature, and APGAR timer can display, heating power rate indicates 0-100%; multi-function self-checking alarms; horizon angle of radiant head can be adjusted in two ways; inclination of bassinet is adjustable; x-ray cassette is under the bed; RS232 connector, data output.
Standard configure:
radiation head, temperature controller, skin temperature sensor, bed temperature sensor, infant bed, I.V. Pole, tray, x-ray cassette, bed deck, Stand.

Technical specification:
Power supply : AC220V 50HZ
Power input: 700VA
Temperature control range：25℃~37℃
Sensor precision: ≤0.3℃
Uniformity of bed temperature: ≤2.0℃
Adjustment angle for the radiation head ：0°,30°,60
inclination of infant bed: ±15°
APGAR Timer: it has sound indication in 1min, 5min, 10min.

Alarming:
with audible and visible alarm, and it can indicate the real temperature and cut off the power supply of heater;
Over-temp alarm: when the skin temperature >39.5℃;
Deviation alarm: indication temperature deviates away the setting temperature ±1℃;
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the outside of bed;
Power failure alarm: when start up the unit, but there is no power and the power cord is disconnected.
System alarm: when there is system malfunction inside of temperature controller.

Package：
Gross Weight：110Kg
Measurement：1270mm×810mm×1110mm

Notice：
Some technical data of this model can be changed properly in standard range according to the standard and user’s requirement like be equipped with the parameter monitor, ventilator and so on. If the technical specification of above product changes, please refer to the standard at selling time.